6mm Inlay Banding

This real wood inlay is heat activated! Just run over it with a household iron and it's securely applied! Comes in 36" lengths.

Applying inlay bandings is a very simple operation. Using a router with a straight cutter bit and guide, rout out a groove the desired width and just a shade shallower than the banding. Now simply place the banding in the groove and run a hot iron or edge banding over it to activate the adhesive. When the inlay is set, simply sand lightly until it is level with the face of the project. If stains or fillers are to be used in finishing the project, it is necessary to protect the inlay from absorbing the color of the stain or filler by first sealing it.