|
Channel Vision 2-Way Splitter/Combiner | | 
|
| Channel Vision 2-Way Splitter/Combiner - HS-2 | $7.90 |
Accessories allow you to professionally complete your system. Use 75-Ohm Terminators on all signal outputs that are not connected to a television or VCR. Un-terminated outputs can cause a 'herringbone' pattern to appear on some channels of the other sets connected to the splitter. These slowly moving, wavy lines will drive you crazy and diminish the performance of the video system. If you are using the coax lines to carry DC signals (for power or Ir signals), use the DC IR Signal Block on output lines that connect directly to a TV set or VCR (and not to a camera or IR splitter). The DC Block will prevent the DC signals from being shorted inside the tuner of the TV or VCR. Specifications | | Manufacturer: | Channel Vision | | Manufacturer Product No.: | HS-2 | | Capacity: | 2-way | | Bandwidth: | 5-1000 MHz | | Insertion Loss: | 3.5 dB max. | | Isolation: | 34 dB min. | | Return Loss: | 30 dB | | Impedance: | 75 ohm | | Passes: | DC Pass All Ports | | Dimensions: | 53 x 47mm |
- Channel Vision 2-Way Splitter/Combiner
Click here for details
All brands and product names are trademarked or registered trademarks of their respective companies.
Prices, specifications, and availability are subject to change without notification. E.&O.E.
Image &
Description provided by and used with permission from Rockler Companies, Inc..
Page revised:
Wednesday, July 16, 2008.
This page is at http://www.woodworking-products.com/go/20240 |
|
