SensaphoneŽ 800 - Remote Monitoring and Control

It Contacts You If Something Goes Wrong
With a built-in temperature sensor, microphone and an AC power failure sensor, this system has the ability to call eight phone numbers and report the conditions with voice-synthesized English if temperatures go above or below certain levels, if a smoke alarm or security system siren goes off, or if there's a power failure (if the system is backed up with a battery). You can also call your vacation home at any time to obtain a status report, or to listen in to on-site sounds, for total peace of mind.

The system can also be expanded with up to seven additional status sensors to detect other conditions of your choice, so long as the sensors use normally-open or normally-closed contacts. These can include:

• Water Sensors (to see if there's flooding in the basement)
  
• Wind Sensors (to get an idea of what the surfing conditions are at the beach house)
  
• Rain Sensors (in case you want to postpone the trip until a dryer weekend)
  
• Freeze Sensors (in case you want an idea of what the snow conditions are like for your snowboarding trip)
  
• Temperature Sensor Just like the one built into the SensaphoneŽ so you can monitor additional temperature-sensitive areas of the property
  
• Smoke Detector (for an instant alert in the event of a fire)

Remote Thermostat Control
The Sensaphone 800 remote thermostat feature even lets you control the thermostat with a phone call, which is great for getting the vacation home to your preferred temperature hours before you arrive. And if you forget to turn the thermostat down before you leave, you can easily do it from any phone, wherever you are. The Sensaphone 800 works with most standard thermostats or dual set-back thermostats. Thermostats are sold separately. The relay outputs are controlled by a low-voltage relay that can handle 30V AC/DC up to 1 Amp (max).

Built-In Features

8 user-selectable inputs, temperature or dry-contact

Microphone monitors high sound alarms and enables remote listen-in

AC power failure sensing with variable recognition time

Battery condition monitor (uses 6 "C" alkaline batteries)

ClockAdvanced Capabilities

User Programmable: alarm recognition time, call delay, inter-call delay, message repetitions

Temperature sensing in Fahrenheit (-20°F to 150°F), or Celsius (-29°C to 65°C)

Individual temperature input calibration

Non-volatile memory for all programmed parameters

The relay outputs are controlled by a low-voltage relay that can handle 30V AC/DC up to 1 Amp (max).

Versatile Dial-Out Capabilities

Alert sensors trigger pulse or tone dial-out automatically

Dials 8 phone numbers, up to 32 digits each

Continues dialing numbers in sequence, until acknowledged

Call Progress: Intelligently detects ringing or busy signal

Intelligent dial out to beepers and pagers

Easy Control Access

Keypad for local programming and status report

Unit can be called from any phone to verify status of all monitored conditions

Local or remote enabling/disabling of all dial-out conditions

Can share a single phone line with an answering machine, allowing full operation of both units

Programmable security code access

Specifications
Manufacturer:	Sensaphone
Manufacturer Product No.:	FGD-0800
Battery:	Uses 6 "C" alkaline batteries (not included), providing up to 24 hours of back-up time
Power Supply:	120 VAC / 9VDC 60Hz 6W wall plug-in transformer w/ 6' cord
Inputs:	8 phone numbers, up to 32 digits each
Temperature sensing range:	Fahrenheit (-20°F to 150°F) or Celsius (-29°C to 65°C)
Weight:	2.0 lbs
Dimensions:	2.1" x 7.8" x 8.8"
Enclosure:	Indoor-rated plastic housing suitable for wall or desktop installation

• FGD-0800 Sensaphone (8 Input / 8 Dialout)
  
• AC Power Adaptor